ERW High Frequency Welded Pipe Machine

ERW High Frequency Welded Pipe Machine

ERW High Frequency Welded Pipe Machine

Roll Forming Machine

1. The C, Z, U, L purlin forming equipment increase the firmness if the machine by adopting new station. 2. The machinery works more stable, which ensured by the gearbox transmission. 3. The after-cutting is used to ensure the smooth quality of the cutting position. 4. This L profile roll forming equipment uses high speed punching machine. 5. The servo feeding on this machinery can achieve high speed. 6. The whole automatic production line is controlled by PLC control panel....

Roof Panel Roll Forming Machine

1. The roof panel roll forming machine has the speed of 30 m / min, greatly improving the production efficiency. 2. This equipment is suitable for simple house, steel plants and other wall board production. 3. It has the competence in material handling system (outbound and inbound logistics); at the same time, the storage system know-how ensures production processes....

Purlin Profile Roll Forming Machine

This type of the C/Z purlin cold roll forming machine is used to form components, such as purlins, having C-shaped and/or Z-shaped cross-sections from sheets of planar material. This kind of machine has these advantages as follows: 1. The C, Z, U, L purlin forming equipment increase the firmness if the machine by adopting new station. 2. The machinery works more stable, which ensured by the gearbox transmission. 3. The after-cutting is used to ensure the smooth quality of the cutting position....

Wall Panel Roll Forming Machine

1. The wall panel roll forming machine adopts servo technology to reach the top speeds without compromising measurement accuracy, durability and reliability. 2. In order to increase the production capacity, usability and better measurement accuracy has been enhanced. 3.Tile lines represent the absolute top of the industry on the basis of their speed and of the finished product's quality. By using the Servo technique and twin press the production speeds can reach up to 30 m/min. This equipment is used in simple house, steel plants and other wall board production....

High-Speed Cut-To-Length Line

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length....