Metal CNC Cut To Length Line

Metal CNC Cut To Length Line

Metal CNC Cut To Length Line

Metal Deck Roll Forming Machine

The metal deck roll forming machine uses new station to increase the strength of the machine. It commonly applies to be used in floor flat. The friction between the steel and concrete can be increased after making dots of the sheet, so that the floor of the fastness is also increased....

High-Speed Cut-To-Length Line

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length....

Metal Cut to Length Line

This is a kind of steel coil leveling equipment, integrating scissor and drop-type stackers. It has the feature of hydraulic adjustments and oiling capabilities. The resulting steel coils have uniform width and flatness, so that the appearances can be improve, at the same time, the quality of finished operation can also be improved too....

Middle Thick Sheet Slitting Line

Capacity of middle thick steel coil slitting line is mainly used to slit steel coils of thickness 0.6~5 mm, 1~6 mm, 2-8mm or 3~10mm. And for steel coils with width: 600~1600 mm, 800~1800mm or 800~2000mm into narrower baby coils. This steel slitter is widely used for proving steel strip coils for cold rolling mill, welded pipe mill, roll forming machine, etc....

HG89 (square 80x80) ERW welded Pipe Production Line

Input raw material: pre-slit carbon steel CR, HR coils (low steel alloy, low carbon steel, tensile strength 600Mpa, yield strength 300Mpa Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 50 -100mm Square tubes: Min40 x 40mm, Max80 x 80mm Rectangular tubes: Min30 x 50, Max60x 100 mm Tube Thickness: 1.2 -4.0 mm(for square pipe, up to 3.5mm) Forming Line Speed: Max 80 m/min...