Metal Coil Cut To Length Line

Metal Coil Cut To Length Line

Metal Coil Cut To Length Line

Metal Deck Roll Forming Machine

The metal deck roll forming machine uses new station to increase the strength of the machine. It commonly applies to be used in floor flat. The friction between the steel and concrete can be increased after making dots of the sheet, so that the floor of the fastness is also increased....

Directly to Square ERW welded Square Pipe Profiles Roll forming welding Line Machine

one complete set of combined rollers can make all the square and rectangular pipes, is economical and practical. The roll forming process takes square or rectangular pipes as one package of profiles between each other automatically adjusted by one set of combined rollers....

HG89 (square 80x80) ERW welded Pipe Production Line

Input raw material: pre-slit carbon steel CR, HR coils (low steel alloy, low carbon steel, tensile strength 600Mpa, yield strength 300Mpa Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 50 -100mm Square tubes: Min40 x 40mm, Max80 x 80mm Rectangular tubes: Min30 x 50, Max60x 100 mm Tube Thickness: 1.2 -4.0 mm(for square pipe, up to 3.5mm) Forming Line Speed: Max 80 m/min...

Thin Sheet Cut to Length Line

The thin sheet cut to length line is a kind of thin coil cut to length system, used to cut cold-rolled steel, coil plates, stainless steels, galvanized steel plate color, etc into length-gauged plates. Moreover, any specification can be cut via uncoil level and cut to length. This thin coil cut to length comprised of hydraulic coil-loading car, hydraulic single-spindle uncoiler, hydraulic coil-head-feeding and coil-press device, coil-end straightener, double-roller pinch feeder, central aligner, main leveler, encoding table, shearing machine, roll table conveyor, piling-up racket, lifting table and collecting table, hole accumulator, tensioner, recoiler, coil-discharging car, hydraulic system, electric control system....

Thin Sheet Slitting Line

Thickness of coil strips is in proportion to capacity of sheet slitting lines, the bigger thickness of master coils need the bigger models of coil slitting machines. Generally, we can classify slitting lines into three groups according to thickness difference, that is, thin sheet slitting line, middle thick coil slitting machine and thick coil metal coil slitter. Here we focus on thin sheet slitting line...