Metal Door Frame Cold Rolling Production Line

Metal Door Frame Cold Rolling Production Line

Metal Door Frame Cold Rolling Production Line

HG89 (square 80x80) ERW welded Pipe Production Line

Input raw material: pre-slit carbon steel CR, HR coils (low steel alloy, low carbon steel, tensile strength 600Mpa, yield strength 300Mpa Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 50 -100mm Square tubes: Min40 x 40mm, Max80 x 80mm Rectangular tubes: Min30 x 50, Max60x 100 mm Tube Thickness: 1.2 -4.0 mm(for square pipe, up to 3.5mm) Forming Line Speed: Max 80 m/min...

Hot-Dip Galvanizing Line

Material: Plain carbon steel, Low alloy steel Steel grade: 08AL, SPCC, SPCD, SPCE, Q195, Q235, Q345 Galvanized layer thickness (double sides): 50—300 g/m2 according to standard GI: GB/T2518-88 State of galvanized layer: normal spangles, tiny spangles, or skin pass spangles. The way of galvanizing process: American-steel union, or Sendzimir....

Steel Coil Slitting Line

The steel coil slitting line, composed of uncoils, feeding, side guide, slitting, edge scrap winding and other equipments, is a production line of decoiling, slitting and recoiling slit steel strips. This kind of production line is able to cut the wide steel coil into narrower steel coils of certain dimensions in the direction of length. The slit steel coils will be as input preparation for those processes, such as rolling, welding, cold bending and forming, punching. All kinds of metal strips can be cut by cutting tools of different materials....

High-Speed Cut-To-Length Line

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length....

Metal Coil Cold Rolling Mill

From planning, engineering, implementation and modernization of your products, Jingye Company can be your preferred supplier and manufacturer for metal cold rolling mills. Due to different numbers of rollers, the metal coil cold rolling mill is divided into 2 Hi, 4 Hi, 6 Hi, and 12 Hi AGC. The metal cold rolling mills is operated by PLCs (programmable logic controller) using latest technology and digital drives. So a high degree of automation can be achieved....