Stainless Steel Pipe Spiral Welding Line

Stainless Steel Pipe Spiral Welding Line

Stainless Steel Pipe Spiral Welding Line

HG89 (square 80x80) ERW welded Pipe Production Line

Input raw material: pre-slit carbon steel CR, HR coils (low steel alloy, low carbon steel, tensile strength 600Mpa, yield strength 300Mpa Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 50 -100mm Square tubes: Min40 x 40mm, Max80 x 80mm Rectangular tubes: Min30 x 50, Max60x 100 mm Tube Thickness: 1.2 -4.0 mm(for square pipe, up to 3.5mm) Forming Line Speed: Max 80 m/min...

76 High Frequency Welded Pipe Machine

Input raw material: pre-slit carbon steel CR, HR coils Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 22 -89mm Square tubes: Min12 x 12mm, Max70 x 70mm Rectangular tubes: Min8 x 12, Max60x 80 mm Tube Thickness: 1.2 -4.0 mm Forming Line Speed: Max 100 m/min...

Thin Sheet Cut to Length Line

The thin sheet cut to length line is a kind of thin coil cut to length system, used to cut cold-rolled steel, coil plates, stainless steels, galvanized steel plate color, etc into length-gauged plates. Moreover, any specification can be cut via uncoil level and cut to length. This thin coil cut to length comprised of hydraulic coil-loading car, hydraulic single-spindle uncoiler, hydraulic coil-head-feeding and coil-press device, coil-end straightener, double-roller pinch feeder, central aligner, main leveler, encoding table, shearing machine, roll table conveyor, piling-up racket, lifting table and collecting table, hole accumulator, tensioner, recoiler, coil-discharging car, hydraulic system, electric control system....

Hot-Dip Galvanizing Line

Material: Plain carbon steel, Low alloy steel Steel grade: 08AL, SPCC, SPCD, SPCE, Q195, Q235, Q345 Galvanized layer thickness (double sides): 50—300 g/m2 according to standard GI: GB/T2518-88 State of galvanized layer: normal spangles, tiny spangles, or skin pass spangles. The way of galvanizing process: American-steel union, or Sendzimir....

Thin Sheet Slitting Line

Thickness of coil strips is in proportion to capacity of sheet slitting lines, the bigger thickness of master coils need the bigger models of coil slitting machines. Generally, we can classify slitting lines into three groups according to thickness difference, that is, thin sheet slitting line, middle thick coil slitting machine and thick coil metal coil slitter. Here we focus on thin sheet slitting line...