Thick Plate Cut-To-Length Line

Thick Plate Cut-To-Length Line

Thick Plate Cut-To-Length Line

Middle Thick Sheet Slitting Line

Capacity of middle thick steel coil slitting line is mainly used to slit steel coils of thickness 0.6~5 mm, 1~6 mm, 2-8mm or 3~10mm. And for steel coils with width: 600~1600 mm, 800~1800mm or 800~2000mm into narrower baby coils. This steel slitter is widely used for proving steel strip coils for cold rolling mill, welded pipe mill, roll forming machine, etc....

High-Speed Cut-To-Length Line

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length....

Thin Sheet Cut to Length Line

The thin sheet cut to length line is a kind of thin coil cut to length system, used to cut cold-rolled steel, coil plates, stainless steels, galvanized steel plate color, etc into length-gauged plates. Moreover, any specification can be cut via uncoil level and cut to length. This thin coil cut to length comprised of hydraulic coil-loading car, hydraulic single-spindle uncoiler, hydraulic coil-head-feeding and coil-press device, coil-end straightener, double-roller pinch feeder, central aligner, main leveler, encoding table, shearing machine, roll table conveyor, piling-up racket, lifting table and collecting table, hole accumulator, tensioner, recoiler, coil-discharging car, hydraulic system, electric control system....

Thick Sheet Slitting Line

This thick plate slitting line, also called metal coil slitter, is able to slit thick steel master coil into small baby coils. The thick coil slitting line is composed of: coil-loading car, double mandrel big-load uncoiler, portal style coil-head guide, press and shovel equipment, double roller pinching feeder, five-roller leveler, end-cutter, Roll table, Central aligner, Disc slitter, scrap winder, hole accumulator, pre-separator& tensioner, Portal style coils-separator and presser, recoiler, coil unloading car, hydraulic control, and electric control....

HG89 (square 80x80) ERW welded Pipe Production Line

Input raw material: pre-slit carbon steel CR, HR coils (low steel alloy, low carbon steel, tensile strength 600Mpa, yield strength 300Mpa Finished products: round tubes, square tubes and rectangular tubes as well as deformed tubes Round tube outside diameter: 50 -100mm Square tubes: Min40 x 40mm, Max80 x 80mm Rectangular tubes: Min30 x 50, Max60x 100 mm Tube Thickness: 1.2 -4.0 mm(for square pipe, up to 3.5mm) Forming Line Speed: Max 80 m/min...